Skip to main content

Getting Started with HMI

This guide walks you through the initial setup of your industREAL HMI unit.

Hardware Setup​

  1. Mount the HMI panel in your enclosure
  2. Connect 24V DC power supply
  3. Connect communication cables (Ethernet, CAN, etc.)
  4. Power on the unit

Software Configuration​

  1. Access the configuration interface via the built-in web server
  2. Configure network settings
  3. Set up communication protocols
  4. Deploy your application

Next Steps​

  • Configure CAN bus communication
  • Set up EtherCAT network
  • Deploy custom UI applications